April 29th, 2009
April 28th 2008
April 28th 2008
Feb. 25th 2008
Vehicle Uses: |
|
One vehicle used daily | BLS-12-A (this model is a battery maintainer). |
Collector cars (stored) | The BatterySolver™ Package |
Truck with one battery | BLS-12-A |
Truck, more than one battery | BLS-12/24-C |
Truck or Implement 24 Volt | BLS-12/24-C |
Motorcycle | BLS-12-A |
Lawn Mower | BLS-12-A |
Boat Uses: |
|
Trolling battery | BLS-12-A |
Outboard | BLS-12-A |
Electric Boat 36 Volt | BLS-36-A |
Electric Boat 48 Volt | BLS-48-A |
Cruise Sail Boat 12 Volt Single Battery |
BLS-12-A |
Cruise Sail Boat 24 Volt | BLS-12/24-C |
Large Power Boat 12 volt | BLS-12/24-C |
Large Power Boat 24 Volt | BLS-12/24-C |
Stationary Uses: |
|
Off grid house 12 volt | BLS-12/24-C |
Off grid house 24 Volt | BLS-12/24-C |
Off grid house 48 Volt | BLS-48A or BLS-48-BW |
Stationary Power/pump | BLS-12/24-C |
Shop Use | BLS-12/24-B |
Golf Carts and Electric Vehicles |
|
36 Volt Golf Cart | BLS-36A |
42 Volt Golf Cart | BLS-42B |
48 Volt Golf Cart | BLS-48B |
72 Volt NEV or Electric Vehicle | BLS-72A |
84 or 96 Volt Electric Vehicle | BLS-84/96-Multi |
120 Volt Electric Vehicle | BLS-120A |
Industrial Forklifts and Lift Trucks |
|
24 or 36 Volt Forklift | BLS-24/36-Multi-F |
36 or 48 Volt Forklift | BLS-36/48-Multi-F |
Connecting and using the BLS is very easy, just connect it and forget it! The device works off of the power of the battery, and therefore does not have to be plugged into AC power. All of the units come with two leads(wires) just like jumper cables. Some units are equipped with alligator type clips and others come with eye rings for permanent attachment to the batteries.
The following pictures show you how to connect the Battery Life Saver electronic device to a battery system. The example system is the same battery arrangement of a 36 volt Club Car DS, it is six 6 volt batteries connected in series.
The main positive and main negative terminals are the same battery terminals that the charger or charging source cables are connected. First connect the black wire from the Battery Life Saver electronic device to the Main negative battery terminal.
Next connect the red wire from the Battery Life Saver electronic device to the Main positive battery terminal.
The BLS is now connected and the LED be on. Finally, securely fasten (with self tapping screws or Ty Wraps) the BLS to something metallic (for example the metal frame of a golf cart).